Stickers seam construction process: 1, cleaning: according to the situation, Shaanxi paste seam zone, using a brush, a hair dryer on a clean, dry cracks treatment, the road on both sides of the crack in the pavement cracks and 20cm range, while clean, otherwise it will affect stickers seam with paste effect. Crack surfaces should be smooth, paste seam tape production, no projections, no dents, no loose, no gravel or oil marks and other contaminants, stick seam tape manufacturer, if pits, stickers seam with supply, must be filled. Construction Notes (1) The ground temperature at 40oC above the surface of the adhesive directly on the crack, 30 oC to press the seam with the following heating can flow freely into the gap can be formed with the strip joints can be; (2) the web Bitwise swing positive, Heat uniformly, rolling when not to get involved air and foreign matter; (3) Do not press the seam with no dirty side of the membrane thus affecting the adhesive properties; (4) for sealing seams than 1cm wide and 1cm deep cracks to use hot asphalt or gravel compacted fill (5) Note scald protection during the construction and traffic safety. Shaanxi paste seam with Swiss bridge _ _ St. seam with suppliers posted by the Xinxiang City of St. Rui Bridge Conservation Technology Co., Ltd. Shaanxi paste seam with Swiss bridge _ _ St. seam with suppliers posted Xinxiang City of St. Rui Bridge Conservation Technology Co., Ltd. (www.srklt.com) this year introduced a new upgrade, the above picture is for reference only, please call this page or image on the telephone, to obtain the latest information, contact: Li Yusheng.